FIRE FIGHTING
COMPLIANCE WITH REGULATION:
SELECT ONE

SCF122-DI 12030

Fire-fighting Diesel pumpset control panel

DISCONTINUED
SCF122-DI 12030
Ask for quotation
SCF122-DI 12030

SCF122-DI 12030 control panels are small, automatic and configurable instruments, useful for managing  operations of small  diesel engine driven fire-fighting pumpsets  in any environment.

They govern the start and stop of the diésel engine driven fire-fighting pumpsets  and protect them by means of the action of the connected and controller-generated alarms, visualize the most relevant values and informations also manage the communication with the operator and both the contour elements and the remote manned centre.

MAIN FEATURES: SCF122-DI 12030

Diesel engine Fire Pumps controllers: EN 12845 / 23500

  • Nº STANDARDS & TECHNICAL RULES
    1 Standard                   EN 12845 Ed.2015
    2 Standard                   UNE 23500 Ed.2012
    3 Standard                   UNI 10779 Ed. 2014
    4 Standard                   IEC 61439-1 Ed. 2011 Low-voltage switchgear and controlgear assemblies
    5 Tech. Rule                 CEPREVEN R.T.1-ROC Ed.2004
    6 Tech. Rule                 CEPREVEN R.T.2-ABA Ed.2006
  • Nº RANGE OF PRODUCTS (according to the type plate)
    1 Nominal supply voltage 230 V AC
    2 Nominal frequency 50Hz / 60Hz.
    3 Battery chargers 12 V DC / 3 A
    4 Capacity of the batteries ( C10 ) 85 Ah
  • Nº CONSTRUCTIVE FEATURES
    1 Enclosure Ingress protection rating: IP65
    2 Protection against impacts degree: IK10 except PLC IGNIMATIC D122
    3 Fireproof degree: The fire is extinguished in <30s with dripping
    4 Display LCD 4 lines / 20 characters
    5 Cabling Free of halogens
    6 Fire resistance: RZ1 according to EN50200 (Max: 830º / 90min)
    7 Working temperatures From -5ºC to 50ºC
  • Nº MEASURING INSTRUMENTS IN THE DISPLAY
    1 Batteries 2 Voltmeter: Battery voltage
    2 2 Ammeter: Battery charging Amp
    4 1 Battery equalization timer
    5 Engine 1 Fuel tank level meter
    6 1 Oil pressure gauge (sensor not included)
    7 1 Engine temperature thermometer (sensor not included)
    8 1 Engine speed meter (sensor not included)
  • Nº PUMP & SYSTEM PROTECTION
    1 System not in autamatic mode
    2 Mains failure
    3 Engine over-speed
    4 Low oil pressure
    5 High engine temperature
    6 Low fuel level
    7 Battery A low voltage
    8 Battery B low voltage
    9 Loss of charger A protection
    10 Loss of charger B protection
    11 Heater overload tripped
    12 Bendix voltage fail
    13 Fail to start
    14 Discharge pressure fail
    15 Low reservoir tank
    16 Low priming tank
    17 Pick-up fault
  • 1 RS485 port (Optional) IGNIMATIC D122 controller  configuration
    2 PC monitoring: Pump and installation general condition
    3 Ethernet port (Optional) IGNIMATIC D122 controller  configuration
    4 PC monitoring: Pump and installation general condition
    5 Voltage free contacts :
    up to 30 V DC / 0,3 A    		 Power not available
    6 Automatic mode Off
    7 Fail to start / not discharge pressure
    8 Grouped alarms
    9 Pump on demand
    10 Pump running with pressure
  • Nº LANGUAGES / OTHER FEATURES
    1 ENGLISH/ ESPAÑOL / ITALIANO / FRANÇAIS / PORTUGUES
    2 Engine heating management via temperature reading probe
    3 Engine hours
    4 Engine coolant circuit management
    5 Buzzer:  80dB
    6 Event historical: Last 47 events